HYDRAULIC MACHINES
OF IOWA
HMI offers the most versatile C-Frame press or punch of all machines available today. The extra large throat depth and height not found on many machines allows for an unlimited number of uses. The infinitely adjustable stroke from 0” to 8" makes it one of the most valuable and versatile assets for your shop you could have today. Let one machine do the work of several. HMI has designed their press frames to have fewer tons per square inch of pressure on their side plates, thus reducing spring back of the frame. This reduces tooling wear.
Features
-
Large heavy duty design of the press frame to limit the deflection.
-
Press bed bolted on, not welded, to prevent distortion. Can be easily removed for regrinding or adding more tapped holes.
-
Large rectangular tubes used at base of machine to give safe, instant portability. Oil reservoir is located vertically between the side plates to keep the machine’s footprint as small as possible.
-
Hydraulic system is equipped with a wire mesh strainer on the suction side and a 10 micron filter on the return side to keep the system clean.
-
Pump, motor, valve and reservoir are all easily accessible for maintenance.
-
Large press bed to accommodate a variety oftooling other than just punching.
-
Reservoir filled with oil.
-
Lock out - tag out accommodations.
-
Operators manual.
This line of hydraulic machines offers the best value in any line of
punching equipment today! With a wide range of tonnages, throat heights,
throat depths and stroke length, there is a machine to fit your needs!
Standard Features
-
2 Hand Controls
-
Bolt on Table
-
Auto Return to Top of Stroke
-
All Hydraulic Fluids
-
NEMA Electrics
-
Disconnect Switch
-
All Steel Construction
Optional Features
-
Punch Kit: Includes Punch Stem, Coupler Nut, Die Holder & Wrench
-
Ram Adapter
-
Hairpin Guarding
-
Foot Switch with Keyed Foot /
2 Hand / Jog Selector Switch
-
Special Open Heights,
Throat Depths & Stroke
Lengths Available
